Suzuki Volusia 800 VL800 Engine Coolant Water Pump Housing Impeller Cap Bolts

Suzuki Volusia 800 VL800 Engine Coolant Water Pump Housing Impeller Cap Bolts

# OEM Suzuki Volusia 800 Engine Water Pump & Cover Assembly

## IMPORTANT: BEFORE YOU BUY

This listing is for a multi-component cooling system assembly. Below is the breakdown of every genuine component from the official parts catalog included in this lot:

* **PUMP ASSY, WATER** – Part Number: **17400-38A10** (Main body housing)

* **IMPELLER** – Part Number: **17491-38A00** (Water pump fan wheel)

* **SHAFT** – Part Number: **17511-38A00** (Internal drive spindle)

* **SEAL, MECHANICAL** – Part Number: **17470-02F10**

* **OIL SEAL (10X21X5)** – Part Number: **09283-10004**

* **BEARING (10X22X6)** – Part Number: **09262-10004**

* **CAP ASSY, WATER PUMP (Model K1/K2/K3/K4)** – Part Number: **17410-41F01** (Outer thermostat housing case)

* **CONNECTOR (Model K2/K3/K4/K5)** – Part Number: **17412-41F00** (Aluminum coolant pipe inlet joint)

* **SCREW** – Part Number: **02112-0612A** (Pump casing screws - 3 units included)

* **SCREW** – Part Number: **02112-0616A** (Connector screws - 2 units included)

* **BOLT** – Part Number: **01547-0620B** (Outer cover mounting bolts - 4 units included)

* **E RING / PIN / O-RINGS** – Original internal retaining hardware components are still installed inside the shaft unit.

* **Donor Vehicle:** 2002 Suzuki Volusia 800 (VL800)

* **Component Location:** Mounted to the lower crankcase section of the engine block.

## Description

This is a comprehensive, genuine **OEM Suzuki Engine Water Pump Assembly** complete with its outer thermostat cap casing, aluminum pipe connection joint, and all native installation hardware. Removed together as a single unit from a functioning cruiser layout, this assembly circulates vital engine coolant through the V-twin cylinders. Perfect factory replacement bundle for fixing an active cooling leak, a cracked pump cap, or replacing warped internal impeller blades.

## Vehicle Fitment

* **Suzuki Volusia 800 (VL800):** 2002

## Condition

* **Functional State:** In solid working condition. The impeller fins are intact with no chips, and the wheel spins freely on the shaft without radial play. Internal mechanical seals and bearings function properly.

* **Cosmetic State:** Shows typical signs of garage storage and road use. Expect normal engine bay dust, light oxidation on the raw aluminum edges, and slight water stains inside the fluid passageways.

* **Notes:** All factory mounting bolt threads are clean and completely undamaged. Gasket surfaces are flat, but old mating silicone or rubber O-ring residue must be cleaned off, and new gaskets/seals are required prior to final assembly.

## Shipping

* **Secure Packaging:** All water pump housing parts and small bolts are thoroughly drained, dried, and wrapped separately in heavy-duty layers of protective bubble wrap.

* **Safe Delivery:** Shipped securely inside a thick, impact-resistant cardboard box with loose packing peanuts filling all voids to eliminate transit shifting and protect the impeller wheel from shock damage.